停車棚，以其獨特的優勢在城市規劃中擔當著重要的作用，停車棚給大家?guī)碇T多便利的同時，那停車棚的粘合方法又有哪幾種呢？

Parking sheds, with their unique advantages, play an important role in urban planning. While parking sheds bring us many conveniences, what are the bonding methods for parking sheds?

這是一種結實的粘合辦法，可是縫紉線簡略被損壞?？p紉粘合通常是與熱合粘合一起使用在PVC涂覆聚酯長絲織物上，以期得到更大的強度，假如在戶外運用，縫紉粘合還要用PVC掩蓋物加以保護?？p紉粘合不適用于PTFE涂覆玻璃纖維織物，和其它一切脆性布基的資料。

This is a strong bonding method, but the sewing thread is slightly damaged. Sewing bonding is usually used with heat bonding on PVC coated polyester filament fabric to obtain greater strength. If it is used outdoors, sewing bonding should also be protected with PVC cover. Sewing adhesion is not applicable to PTFE coated glass fiber fabrics and all other brittle cloth base materials.

濟南停車棚熱合粘合：膜材的大特點就是強度比較高，在進行使用的過程當中耐久性特別好，在公共場所下具有著很好的防火性，所以能夠達到更的使用體驗，并且遮光度不受紫外線影響也受到了很多人的認可，這對于使用壽命來說自然就會很好的促進作用，對于汽車的保護功能也是更，可以避免汽車受紫外線的侵害。

Jinan parking shed thermal bonding: the film material is characterized by high strength, especially good durability in the process of use, and good fire resistance in public places, so it can achieve a safer use experience, and the shade is not affected by ultraviolet rays, which has also been recognized by many people. This will naturally promote the service life and the protection function of the car, It can prevent the car from being damaged by ultraviolet rays.

停車棚是由一組連續的拉桿和連續的或不連續的壓桿組合而成的自應力、自支撐的網狀桿系結構，其中“不連續的壓桿”的含義是壓桿的端部互不接觸，即一個節點上只連接一個壓桿。停車棚內部采用Φ38鍍鋅圓管與車棚框架焊接，加強棚頂部強度，可讓棚內感覺寬敞明亮，停靠車輛輕松方便，完全符合停車棚制作要求規范。

The parking shed is a self stressing and self-supporting reticular bar structure composed of a group of continuous pull rods and continuous or discontinuous compression rods. The meaning of "discontinuous compression rods" is that the ends of compression rods are not in contact with each other, that is, only one compression rod is connected to a node. Used inside the parking shed Φ 38 galvanized round pipe is welded with the shed frame to strengthen the strength of the shed top, which can make the shed feel spacious and bright, and the parking vehicles are easy and convenient, which fully meets the requirements and specifications for the production of the shed.

停車棚立柱底腳采用10mm厚鋼板與預埋件牢固焊接，在安裝停車棚的時候?qū)㈩A(yù)埋件用混凝土澆筑后，用螺栓與立連接，抗風系數高，增加車棚整體牢固程度，能抵抗12級以上臺風來襲。

The column foot of the parking shed is firmly welded with the embedded parts with 10mm thick steel plate. When installing the parking shed, the embedded parts are poured with concrete and connected with the vertical parts with bolts. The wind resistance coefficient is high, which increases the overall firmness of the parking shed and can resist the attack of typhoons above grade 12.

濟南停車棚是以建筑織物，即膜材料為張拉主體，與支撐構件或拉索共同組成的結構體系，它以其新穎獨特的建筑造型，良好的受力特點——成為大跨度空間結構的主要形式之一。

Jinan parking shed is a structural system composed of building fabric, i.e. membrane material, and supporting components or cables. It has become one of the main forms of long-span spatial structures with its novel and unique architectural shape and good stress characteristics.

主要向大家介紹了停車棚粘合的方法有哪些的主要內容，相信大家在仔細閱讀完本文分享介紹后對以上問題有了了解與認識了，希望以上分享對大家有所幫助，如有問題歡迎大家在線www.ajuxfs.cn咨詢熱線客服。

It mainly introduces the main contents of the bonding method of the parking shed. I believe that after carefully reading the sharing and introduction in this article, you will have an understanding of the above problems. I hope the above sharing will be helpful to you. If you have any questions, please go online at www.lantianpengmo Com hotline customer service.