Curved arm, all aluminum alloy skeleton structure, with strong springs at the connection part of the curved arm. Manual or electric compression springs are used to close the canopy surface, and the elasticity of the curved arm is used to open and extend the sunshade. During the operation of the flat pushing curved arm movement, the distance between the two curved arms should be between 20 ° and 160 °. The arm of the pushing guide rod should be perpendicular to the guide rod, so that the awning fabric is in a tension state. Aluminum alloy skeleton, lightweight and sturdy structure, anodized and sprayed with paint on the surface, with a long-lasting, smooth and bright appearance, and corrosion resistance.

面料，通常有腈綸纖維和滌綸纖維面料兩大類，面料色彩，花型，款式豐富，根據使用者愛好選擇，由于腈綸纖維面料采用色紡為此耐氣候色牢度很好，可以達到7-8級，在空氣環境條件好的情況下使用可以五年不褪色，對比之下滌綸纖維面料的耐氣候色牢度一般。面料應有一定防水性能，優良的品質面料抗?jié)B水性應大于350mm靜水壓水柱。

Fabric is usually divided into two categories: acrylic fiber and polyester fiber. The fabric has a variety of colors, patterns, and styles, and can be selected according to user preferences. Acrylic fiber fabrics have good color fastness to weather due to their color spinning, reaching 7-8 levels. They can be used for five years without fading under good air conditions, while polyester fiber fabrics have average color fastness to climate. The fabric should have a certain degree of waterproof performance, and the excellent quality of the fabric should have a water permeability resistance greater than 350mm hydrostatic water column.

整體機構性能，整體結構反映在耐積水載荷，操作力抗風性能和機械耐久性能等方面。

The overall performance of the mechanism is reflected in aspects such as resistance to waterlogging loads, operational force, wind resistance, and mechanical durability.

驅動系統，有手動曲柄搖桿絞盤或管狀電機驅動，一般5米以上應選擇管狀電機驅動，在可能斷電地區，防止起風時不能收合，需要選擇手動電動兩用管狀電機，在斷電起風時可以使用手搖曲柄搖桿收回遮陽篷，避免損失。尺寸越大的遮陽篷將會使用更大相應扭矩的電機。

The drive system includes a manual crank rocker winch or a tubular motor drive. Generally, a tubular motor drive should be selected for areas over 5 meters away. In areas where power may be cut off to prevent wind failure, a manual and electric dual purpose tubular motor needs to be selected. When power is cut off and wind blows up, a manual crank rocker can be used to retract the sunshade to avoid losses. The larger the size of the sunshade, the greater the corresponding torque of the motor.

控制系統（供客戶選擇）

Control system (for customer selection)

①開關控制

① Switch control

②無線電控制（遙控）

② Radio control (remote control)

③光風溫度雨傳感器配合控制

③ Coordinated control of light, wind, temperature, and rain sensors

由于遮陽篷抗風性能有限，當發現篷體上下浮動幅度過大時就應收回。在人力不及的時候，使傳感器按照設定的狀態可自動收回開啟。既提高舒適性又保證性。

Due to the limited wind resistance of the sunshade, it should be retracted when it is found that the floating range of the canopy is too large. When manpower is insufficient, the sensor can automatically retract and turn on according to the set state. Improve comfort while ensuring safety.

感謝您的閱讀，此文的文章來源：濟南遮陽棚更多的內容和問題請點擊：http://www.ajuxfs.cn我們會繼續努力的為您提供服務，感謝您的支持！

Thank you for reading. The source of this article is Jinan Sunshade. For more information and questions, please click on: http://www.ajuxfs.cn We will continue to work hard to provide you with services. Thank you for your support!